Ahh, the Baptist fan. Is there anything more classic? Several months ago I did this design for the first time on my improv throw pillows, and I loved the look and texture it provided! So when I decided to quilt one of my Misty Mountains versions with this design, I knew I had to snap some pictures along the way so you could try it too!
Some of the links in this post are affiliate links, meaning, at no additional cost to you, I may earn a small commission if you choose to click through and make a purchase.
Hand quilting in general uses very little supplies, and this is no exception. You’ll need…
- Hand quilting thread (I like to use Perle cotton in size 8 or 12)
- Thimble (This one is the BEST!)
- A ruler
- A 1/8″ hole puncher
- Sharpie or pen for marking plastic
- 2 mechanical pencils, or one mechanical pencil with one of the following: quilter’s pencil, chalk pencil, or thin hera marker
- White opaque flexible chopping mats* (see note below)
*Note: These chopping mats are used to make your template. I buy these at Dollar Tree ($1 for 2, can’t beat that price!) and they really are great for making templates. I also use them to make EPP shape templates for fussy cutting, since you can see through them. They’re rigid enough to last but easy to cut with scissors. If you can’t find these, I suggest using cardboard or another rigid material that’s easy to cut.
Step 1: Make the template
- Cut a piece of the chopping mat into a 2.5″ x 8″ rectangle.
- Using a sharpie or pen, make marks on one side of the chopping mat piece that are 1″ apart. On the other side, make marks that are 3/4″ apart. I did 7 marks at 1″ and 9 marks at 3/4″.
- Using your 1/8″ hole puncher, punch out the marks you’ve just created. I like to push my hole puncher as deep as it will go on my template because I like having room between the holes and the edge of the template. Now your template is ready to use! You’ll be able to create Baptist fans that are 3/4″, 1″, 1 1/2″, and 2″ apart.
Step 2: Mark your fan design
- The design gets marked on a basted quilt. I spray baste which allows me to mark lines easily without pins in the way. However, you can always pin baste and work around your pins. Or, mark your design when the quilt is laid out, and add the pins after marking.
- Similar to using a protractor (remember those?? And you thought you’d never use them again…), you’ll use the two mechanical pencils (or one pencil with marking utensil of choice) to mark the fan design. I use mechanical pencils WITHOUT lead, similar to how one would use a hera marker. I actually bought a thin hera marker for this purpose… and then literally could not find it for this tutorial. I searched for about 20 minutes and gave up. Oh well, pencils work just fine! Just a note, the lines made with an unleaded pencil can be quite faint at times. If you need a bolder line, I suggest one of the other marking utensils listed in the supply list.
- At your starting point (usually the bottom left corner of the quilt), put pencil one into the first hole, it will stay stationary while you mark the whole fan. Using the second pencil, start at one end and drag it across to the other side, thus creating a line in your quilt and a perfect arc.
- Keeping the first pencil firmly in place, move your second pencil up the holes, making marks as you go. I use one side of the template at a time (only 1″ holes or only 3/4″ holes for a whole project) but feel free to vary the size if you want!
- Once you’ve gotten the number of lines you want, move both pencils and the template to the next starting point and repeat.
There are many ways to do Baptist fans, but my favorite is when the fans are at an angle, like below. To create this, start at the bottom left of your quilt and mark the first fan. The end of the first fan’s lines is the anchor point where pencil one goes to start marking the second fan. When marking these lines, stop when you hit the lines from fan 1.
On subsequent rows after row 1, your anchor point for pencil one is the divot point where two fans meet.
Step 3: Stitch!
Once you’ve marked all your lines, it is time to stitch it up! Need a refresher? Check out my hand quilting tips & tricks.
- The easiest way to stitch a Baptist fan design is in horizontal rows, one fan at a time. Start at the bottom left corner of your quilt, and place your needle in the first line. Whether you start at the bottom or top of that line depends on how many arcs you’ve traced for your fan design. In my example below, I have 5 arcs per fan. I always want to end my fan at the bottom of the design. So, for this design, I’ll start at the top of line 1, and stitch down (Number 1 in diagram below).
- Travel your needle between the quilt layers and come up at the bottom of line 2*
- Quilt up line 2.
- Travel, and start at the top of line 3.
- Quilt down line 3
- Travel, and start at the bottom of line 4
- Quilt up line 4
- Travel, and start at the top of line 5.
- Quilt down line 5
- You’re positioned to travel through the layers again to start at the top of line 1 of the next fan.
*Note: Traveling refers to moving your needle between your quilt top and batting. It is a way to move around the quilt when hand-quilting without creating undesirable stitches on the back of the quilt or cutting your thread. To travel, on the last stitch on the front, instead of pushing the needle all the way through the layers, push it through only the quilt top, and angle it sideways to move it to where you want it to go. Then, push the needle back up through the quilt top in your new starting position.
You should not be able to see your traveling stitch on either the front or the back of the quilt. You’re essentially pushing the needle through the batting only.
When I reach the end of a row, I knot and trim my thread, and then start the next row on the left side of my quilt top. I’m always moving across the quilt top in a left to right fashion.
Any questions? Comment below! As always, if you try it, please tag me on Instagram @patchworkandpoodles so I can see it too!